• Quality 4.0 Techniques in Manufacturing 

  SHOPNIL, AKIL AHNAF (Galgotias University, 2023-05)

  Purpose: To revolutionize today's manufacturing system, the standards 4.0 concept seeks to build smart factories outfitted with smart gear to produce smart and intelligent items. The primary objective of this research is ...

• Quality 4.0 Techniques in Manufacturing 

  SHOPNIL, AKIL AHNAF; SHEMANTO, MAHMUDUL HASAN (GALGOTIAS UNIVERSITY, 2023)

  Purpose: To revolutionize today's manufacturing system, the standards 4.0 concept seeks to build smart factories outfitted with smart gear to produce smart and intelligent items. The primary objective of this research is ...

• STATIC, FATIGUE AND CREEP ANALYSIS OF BOILER SHELL WITH CIRCUMFERENTIAL RIVETED JOINT 

  GUPTA, VAIBHAV (GALGOTIAS UNIVERSITY, 2022-05)

  Boilers and pressure vessels with riveted joints are used to contain pressurized fluids and are subjected to complex loads under static, dynamic and creep situations. Pressure vessel failure happens both circumferentially ...

• PORTABLE AIR COOLER 

  VIBHU PANDA, 19GPTC4010064; RAJAN DUBAY 1, 9GPTC4010055; ATUL BAJPAYEE, 19GPTC4010040; DEEPAK TIWARI, 19GPTC4010054; PRINCE YADAV, 19GPTC4010071 (GALGOTIAS UNIVERSITY, 2022-05)

  Refrigerator and air conditioners are the most energy consuming home appliances and for this reason many researchers had performed work to enhance performance of the refrigeration systems. Most of the research work done ...

• “ARDUINO FIRE FIGHTING ROBOT” 

  SAQUIB ABDULLAH, 19GPTC4010015 (Galgotias University, 2022-05)

  Detecting fire and extinguishing is a hazardous job for a fire extinguisher, it often risks the life of that person. This project aims in giving a technical solution to the mentioned problem. A robot is a mechanical ...

• A MAJOR PROJECT REPORT ON “ARDUINO FIRE FIGHTING ROBOT” 

  WASEEM AKRAM, 19GPTC4010029 (GALGOTIAS UNIVERSITY, 2022)

• ARDUINO FIRE FIGHTING ROBOT 

  SAQUIB ABDULLAH, 19GPTC4010015 (GALGOTIAS UNIVERSITY, 2022)

• HEAT LOAD CALCULATION 

  Abdul Samad, 19GPTC4010020 (GALGOTIAS UNIVERSITY, 2022)

• A STUDY ON LOW COST MOUNTAIN ROAD NETWORK MAINTENANCE IMPACTAND INFRASTRUCTURE 

  Krishna Agrawal, 1713101745; Nafees Ahmad, 1714101061 (Galgotias University, 2021-06)

• ESTIMATION OF QUALITY OF MELT USING ION EXCHANGE RESIN METHOD 

  RAJAN DEVKOTA, 1714101083; ATAL BABU, 1714101026 (Galgotias University, 2021-06)

• Assessment of appropriate areas for establishment of Solar Thermal Power Plant 

  Shubham Saurav, 1714101103 (Galgotias University, 2021-06)

• A review on abrasive water jet machining process and optimization of its parameters 

  Prabhat Ranjan, 1714101072; Pradumn Chaubey, 1714101073 (Galgotias University, 2021-06)

• A review on abrasive water jet machining process and optimization of its parameters 

  Prabhat Ranjan, 7597665845; Pradumn Chaubey, 9415255359 (Galgotias University, 2021)

• Effect Of Vortex Generators & Rear Spoiler On A Low-End Sedan Passenger Car 

  Sartaj Anwar Khan, 7068126384; Nikhil Pasricha, 7838982003 (Galgotias University, 2021)

• Mechanical Strength Study of Off-Road Vehicle Chassis Body Materials 

  Bhaskar Pathak, 1714101036; Pranav Rathore, 1714101075 (Galgotias University, 2021-05)

• ANALYSIS ON FABRICATION OF STEERING USING ACKERMANN MECHANISM 

  NIKHIL KUMAR SINGH, 1714101063; ANUJ KUMAR GUPTA, 1714101016 (Galgotias University, 2021-06)

• INVESTMENTS IN THE LONG-TERM ELECTRIC SYSTEM TO ENCOURAGE THE USE OF PLUG-IN HYBRID ELECTRIC VEHICLES 

  Deepanshu Bhatia, 1714101040; Mohd Zaid Anwar, 1714101054 (Galgotias University, 2021-06)

• MODELLING AND ANALYSIS OF BOILER USED IN POWER PLANT 

  PRASHANT SHUKLA, 1714101078; ASHWANI KUMAR VISHWAKARMA, 1714101025 (Galgotias University, 2021-06)

• MODELLING AND ANALYSIS OF BOILER USED IN POWER PLANT 

  PRASHANT SHUKLA, 1714101078; ASHWANI KUMAR VISHWAKARMA, 1714101025 (Galgotias University, 2021-06)

• Design and Analysis of Spur Gear, Helical Gear and Bevel Gear by using Ansys 

  ANUJ KUMAR SINGH, 1714101017; SWAPNIL KUMAR, 1714101110 (Galgotias University, 2021-06)

View more